Fort Mill Electrical Company handles full-service electrical work for homes and businesses across Fort Mill and York County, South Carolina. Whether you need a quick repair, a panel upgrade, or a complete rewiring project, we take the call and get the job scoped before anything is scheduled. We are open every day from 6:00 AM to 10:00 PM. Dependable service. A price agreed before we start. Local know-how.
Call (839) 293-6956 for a quote.
Most electrical calls start the same way: a light that flickers, an outlet that stopped working, a breaker that trips every time you run the microwave, or half the house suddenly going dark. These are not mysteries. They are symptoms, and each one points to something specific that needs attention.
Flickering lights and warm outlets are warning signs, not quirks. A warm cover plate on an outlet or switch means current is going somewhere it should not. A breaker that trips repeatedly is not a nuisance reset job, it is the panel telling you the circuit is overloaded or there is a fault downstream. We trace the problem to its source before any work begins.
We handle outlet repair and replacement, including dead outlets, sparking outlets, and broken covers. We replace switches that have stopped responding or feel loose in the wall. GFCI outlets in kitchens, bathrooms, and exterior locations get tested and replaced when they fail to reset or trip without cause. AFCI protection on bedroom and living area circuits is part of the same conversation when older wiring is involved. Circuit troubleshooting and breaker repair round out the everyday work we do in homes across the area.
The wiring done properly, start to finish, is what keeps a repair from coming back. We keep your home powered and safe.
A panel that was installed decades ago was sized for the electrical load of that era. Homes now run more circuits, more appliances, and more devices than any older panel was designed to handle. When breakers trip often, lights dim when an appliance kicks on, or you simply cannot add a circuit without running out of space, the panel is the bottleneck.
We handle 200-amp service upgrades, main panel replacements, and fuse box upgrades for homes that have never been converted to a modern breaker panel. Subpanel installation is a practical option when a detached garage, a workshop, or a finished basement needs its own dedicated circuits without running everything back to the main panel. Proper grounding and bonding are part of every panel job, not an afterthought. Load calculations tell us what the service entrance needs to carry before we start.
Panel work is a straightforward choice for homeowners and property managers who want the electrical side of a property handled correctly and without repeat visits.
Don't let a small wiring issue turn into a fire risk, especially in a home with older wiring that was never updated. Knob-and-tube wiring and aluminum branch circuit wiring are both common in homes built before the 1980s, and both carry real risks when they age or are modified improperly. We replace knob-and-tube systems and remediate aluminum wiring connections, not as an upsell, but because the underlying problem is a safety issue that does not improve on its own.
Whole-home rewiring and partial rewiring come up when a house has been added onto over the years, when an inspection flags wiring concerns, or when a renovation opens walls and makes the work practical to do right. We also handle wiring for additions and remodels, basement circuits, and sump pump circuits for homes where water management is a concern.
Dedicated circuits are a separate category of work that comes up constantly. A dryer, a washer, a refrigerator, a dishwasher, a microwave, and any 240-volt equipment each need their own circuit sized for the load they draw. Running a high-demand appliance on a shared circuit is how breakers trip and wiring overheats. We install dedicated appliance circuits and 240-volt outlets as standalone jobs or as part of a larger project.
We're one phone call from getting your power right.
Good electrical work isn't complicated, it's just done right, and that applies as much to a ceiling fan swap as it does to a panel upgrade.
For indoor lighting, we install recessed lighting, replace ceiling fixtures, and add under-cabinet lighting in kitchens. Outdoor and exterior lighting covers landscape lighting, security lighting, flood lights, and porch lights. We run the wiring and install the fixture, whether it is a straightforward swap or a new circuit where none existed before.
Ceiling fan installation and replacement is a common call. Some rooms have a ceiling box rated for a fan, some do not. We confirm what is there before the work starts and upgrade the box if needed. Ceiling fan wiring, including wall controls and remote receivers, is part of the job.
Outlet installation covers adding outlets in rooms that are short on them, installing GFCI outlets in wet locations, adding outdoor weatherproof outlets for patios and garages, and putting in USB outlets where they make sense. Dimmer switches and smart switches are part of the same category of installation work.
The work area left as it was found is the standard we hold to on every job. Call now and we'll get the power back where it belongs.
York County's growth and South Carolina's storm patterns make certain electrical jobs come up more often here than in other parts of the country. These three services reflect what Fort Mill homeowners and property managers are actually dealing with.
Fort Mill and the surrounding communities have grown quickly, and that growth puts pressure on the electrical infrastructure in older neighborhoods. A home built twenty or thirty years ago may have a panel that was adequate at the time but is now undersized for the circuits a modern household needs. When new appliances, EV chargers, or home additions push the load beyond what the panel was designed to carry, an upgrade is the right answer. We assess the current amperage, replace the panel, and handle service entrance work when the utility connection needs to be updated to match.
South Carolina's storm season is real, and the suburban and semi-rural character of much of the Fort Mill area means that outages after a severe thunderstorm or ice storm can last longer than they do in dense urban areas. A standby generator wired to a transfer switch keeps critical circuits running when the grid goes down. We handle the generator hookup, the transfer switch installation, and the wiring that connects a standby unit to the panel. The generator unit itself is outside our scope. Our work is the electrical connection that makes it function safely.
Lightning activity in South Carolina is among the highest in the country, and a single nearby strike can send a voltage spike through every circuit in the house. A panel-level surge protection device catches that spike before it reaches appliances, electronics, and anything else connected to the wiring. It works differently from a power strip. A whole-home surge protector is installed at the panel and covers every outlet and circuit in the house at once. For homes with EV chargers, home offices, or any significant investment in electronics, it is a practical addition to any panel job or as a standalone install.
If you've never hired an electrician before, an EV charger installation is a good example of a job that looks simple and has a few steps that matter. A Level 2 home charger runs on a 240-volt dedicated circuit. Before anything is wired, we check whether the panel has the capacity to carry the added load. If it does, we run the circuit and install the outlet or hardwired connection. If it does not, the panel conversation comes first. We handle both.
Electrical safety inspections are a different kind of service. They come up when a home is being purchased and the buyer wants to know what the wiring looks like before closing. They come up for rental properties when a landlord needs documentation of the electrical condition. They come up for older homes where the wiring has never been evaluated. An inspection covers the panel, the visible wiring, the outlets and switches, grounding, and any obvious code concerns. Smoke detector wiring and carbon monoxide detector placement are part of the same safety conversation.
Pricing questions are fair questions, and we answer them on the call. When you reach us, you get a rate before anything is scheduled. Whether the job is a panel upgrade, a rewiring project, an outlet installation, a ceiling fan, an EV charger hookup, or a generator connection, the price is confirmed before we move forward. Ask what it covers and you get a straight answer.
We are open every day from 6:00 AM to 10:00 PM, including Saturdays and Sundays. Short-notice calls are welcome, and we take urgent work when the schedule allows. If the schedule allows, we say so on the call.
Not the biggest name in town. Just the one that answers. No runaround.
Property managers have their own priorities when the power goes out. A unit that is dark is a unit that cannot be occupied, and the repair needs to happen quickly and correctly the first time. We work with property managers, landlords, and multi-unit property owners across Fort Mill and York County to get rental units back in service and to handle the ongoing electrical work that comes with managing a property.
For businesses, we handle commercial panel upgrades, commercial wiring, commercial lighting, and dedicated circuits for equipment. Tenant improvement electrical work is a regular part of what we do, whether a new tenant needs a different circuit layout or a space is being converted for a different use. Offices, retail spaces, and light commercial properties all fall within the scope of work we take on.
A straightforward choice for homeowners and property managers means the job is scoped on the call, the price is clear before we schedule, and the work is handled without repeat visits to finish what was started.
Fort Mill is the primary service area, and we take calls from across York County, including Rock Hill, Tega Cay, Lake Wylie, Indian Land, and Clover. We also serve properties along the Charlotte metro fringe, including the Ballantyne corridor just across the state line.
Calls about this area are answered here, by someone who can scope the job on the phone and tell you what the work involves before anyone is dispatched.
We cover the full range of residential and commercial electrical work in Fort Mill and across York County. That includes repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, lighting, ceiling fans, dedicated circuits, EV charger installation, backup generator hookups, whole-home surge protection, and electrical safety inspections.
If you are not sure whether your job fits, call (839) 293-6956 and describe what you are dealing with.
Call (839) 293-6956 and describe what you are seeing or what you need done.
We scope the job on the phone, explain what the work involves, and give you a price before anything is scheduled. Nothing is put on the calendar until you have agreed to it.
Flickering lights and warm outlets are warning signs, not quirks. A cover plate that is warm to the touch, an outlet that sparks when you plug something in, a burning smell near a receptacle or the breaker box, or a breaker that will not stay on after you reset it are all situations that call for prompt attention, not a wait-and-see approach. We are available every day from 6:00 AM to 10:00 PM.
Stop using the outlet or circuit immediately and do not plug anything else into nearby receptacles.
If the panel itself is hot, buzzing, or sparking, turn off the main breaker if it is safe to do so and call us at (839) 293-6956.
We take urgent calls every day from 6:00 AM to 10:00 PM and will scope the situation with you on the phone before anyone is dispatched.
A breaker that trips repeatedly is signaling a real problem, whether that is an overloaded circuit, a wiring fault, or a failing breaker. Resetting it without addressing the cause puts stress on the wiring and can create a fire risk over time. Call us so we can trace the fault and tell you what the fix involves before anything gets worse.
The price is confirmed before we schedule, based on what you describe on the call. If something unexpected turns up once the work is underway, we communicate that before the scope changes, not after. You are not presented with a different number at the end of the job without having agreed to it first.
Clear access to the breaker panel and to the outlets, switches, or fixtures where the work will happen. If the panel is behind stored items or the work area is a tight space, a few minutes of preparation before the visit makes the job go faster. We will let you know on the call if there is anything specific to have ready.
It depends on the job and the schedule when you call. For planned work like a panel upgrade or EV charger installation, calling a few days ahead gives us time to scope the job properly. For urgent repairs, call during our hours of 6:00 AM to 10:00 PM and we will tell you what the schedule allows that day.
Yes. We work with landlords managing single-family rentals and property managers overseeing multi-unit buildings across Fort Mill and York County. The process is the same: scope the job on the call, confirm the price before scheduling, and handle the work so the unit is back in service. We understand that a dark unit is a unit that cannot be occupied, and we prioritize accordingly.
A repair visit focuses on a specific symptom: a dead outlet, a tripping breaker, a faulty switch. We diagnose the cause, explain the fix, and carry it out. A panel upgrade is a larger project that starts with a load calculation and involves replacing the main panel, updating the service entrance if needed, and confirming the wiring can carry the new capacity. Both start the same way: a call where the scope and price are worked out before anything is scheduled.
Fort Mill Electrical Company is open every day from 6:00 AM to 10:00 PM. Built for homeowners. Ready for property managers. Ready for your panel.
Call (839) 293-6956 for a quote.
Tell us what you are dealing with, and we will tell you what the work involves and what it costs before anything is scheduled.
When something goes wrong with the wiring or the panel, the right starting point is a clear picture of what the job involves and what it will cost. We scope every job on the phone before anyone is dispatched, explain the work in plain terms, and confirm the price before anything is scheduled. The table below covers the electrical services we handle in Fort Mill and York County, along with who each one fits best and what is practical to know before you call.
| Type of Work | What's Included | Ideal For | Good to Know |
|---|---|---|---|
| Ceiling Fan Installation |
| Homeowners replacing an old fan or adding one to a room without existing wiring | A fan rated for damp or wet locations is required in covered outdoor areas. We confirm the rating before the install. |
| Older-Home Rewiring |
| Owners of older Fort Mill and York County homes with wiring that has not been updated | Flickering lights and warm outlets are warning signs, not quirks. Older wiring that has been modified over the years often needs a full assessment before a repair is scoped. |
| Wiring & Circuit Installation |
| Additions, workshops, garages, and any space that needs new circuits from the ground up | Circuit sizing depends on the load it will carry. We calculate that before running wire so the breaker and wire gauge are matched correctly. |
| Electrical Panel & Service Upgrades |
| Homeowners renovating, adding appliances, or running out of breaker slots | Fort Mill's rapid growth means many homes are being expanded beyond what their original panel was sized for. A load calculation is the first step. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance or dealing with repeated trips on a shared circuit | Sharing a circuit between a microwave and other kitchen loads is one of the most common causes of nuisance trips. A dedicated circuit solves it at the source. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or property manager dealing with a symptom they cannot explain | Most faults are traced to a specific cause before any parts are replaced, so you know what the repair actually addresses. |
| Outlet & Switch Installation |
| Homeowners adding outlets or replacing outdated devices | Kitchens, bathrooms, garages, and outdoor areas have specific code requirements for GFCI protection. We confirm what applies before the install. |
| Lighting Installation |
| New construction, remodels, and homeowners upgrading existing fixtures | Outdoor lighting circuits in York County need weatherproof protection. We confirm the right fixture and box rating for each location. |
| Breaker & Fuse Repair |
| Homes where a breaker trips repeatedly or fails to reset | A breaker that trips under normal load may signal a wiring fault rather than a bad breaker. We check both before recommending a fix. |
| EV Charger Installation |
| Fort Mill commuters adding a Level 2 charger at home | If the panel is near capacity, an EV charger install may involve a panel upgrade conversation first. We work through that on the call before scheduling. |
| Backup Generator Installation |
| Homeowners who lose power during York County storm season and need essential circuits to stay on | We handle the electrical side of the connection. The transfer switch is the critical piece that keeps the generator from back-feeding the utility line. |
| Whole-Home Surge Protection |
| Homes with EV chargers, home offices, or significant electronics in a lightning-active area | The South Carolina Piedmont sees regular lightning activity. A panel-level protector catches spikes before they reach every outlet in the home. |
Call (839) 293-6956 to talk through what you are dealing with and get a price before anything is scheduled. We are available every day from 6:00 AM to 10:00 PM.
(839) 293-6956